Kayan da aka fi amfani da su wajen gyaran takalmi sun haɗa da nau'ikan nau'ikan daban-daban, kowannensu yana da fa'idodi da rashin amfani na musamman, da kuma takamaiman fannoni na amfani da su. Ga wasu kayan gyaran takalmi na yau da kullun da kaddarorinsu:
TPU (thermoplastic polyurethane)
- Fa'idodi: kyakkyawan gogewa, naɗewa da juriya ga gajiya; ana iya amfani da shi azaman matashin iska don samar da farfadowa da shaƙar girgiza; kayan lace suna da ƙarfi da roba; ana amfani da manne akai-akai.
- Rashin amfani: Mafi tsada, yana iyakance amfani da babban sikelin.
- Yankunan aikace-aikace: lamination na tafin kafa da na sama, tasirin ado, da kayan lace.
Tafin roba
- Fa'idodi: yana da juriya ga gogewa, ba ya zamewa, yana da sassauƙa, ba ya da sauƙin karyewa, yana da laushi mai kyau.
- Rashin amfani: ya fi nauyi, yana da sauƙin tofawa, ba shi da wahala kuma yana da sauƙin hudawa, yana tsoron nutsewa da mai.
- Wuraren amfani: takalman wasanni, takalma na yau da kullun.
Tafin polyurethane (PU)
- Fa'idodi: ƙarancin yawa, laushi mai laushi, kyakkyawan sassauci, jin daɗi da sauƙin sawa, kyakkyawan juriya ga abrasion da aikin shaye-shaye.
- Rashin amfani: shan ruwa mai ƙarfi, sauƙin yin rawaya, sauƙin karyewa, rashin isasshen iska.
- Wuraren amfani: takalman fata masu inganci, takalman wasanni, takalman tafiya.
EVA
- Fa'idodi: mai sauƙi, mai laushi mai kyau, mai sassauƙa, mai sauƙin sarrafawa.
- Rashin amfani: ba ya jure lalacewa, ba ya jure mai, yana da sauƙin sha ruwa.
- Wuraren amfani: takalman gudu, takalman yau da kullun a tsakiyar tafin ƙafa.
Tsarin TPR
- Riba: mai sauƙin siffantawa, mai arha, mai sauƙi, mai daɗi, mai yawan sassauƙa.
- Rashin amfani: kayan aiki masu nauyi, rashin gogewa, rashin laushi da lanƙwasawa, rashin shan girgiza.
- Wuraren amfani: takalma na yau da kullun, takalman yara.
PVC
- Fa'idodi: mai arha, juriya ga mai, juriya ga lalacewa, kyawawan kaddarorin kariya.
- Rashin amfani: rashin kyawun aikin hana zamewa, rashin kyawun tsari, ba ya jure sanyi, ba ya jure naɗewa.
- Aikace-aikace: takalma masu arha.
TR
- Riba: Iri-iri na kamanni, kyakkyawan yanayin hannu, launuka masu kyau, fasaha mai girma, ana iya sake amfani da ita.
- Yankunan aikace-aikace: kayan tafin hannu masu kyau ga muhalli.
Zaɓar waɗannan kayan ya dogara ne da abubuwa kamar buƙatun ƙira na takalma, kasuwar da aka nufa, da kuma ingancin farashi. Masu kera za su zaɓi kayan takalmi masu dacewa bisa ga takamaiman buƙatun aikace-aikace da buƙatun aiki. Yana da kyau a ambata: inganta juriyar gogewa na ƙarshen kayan takalma shi ma muhimmin batu ne.Inganta juriyar gogewa a samanzai tsawaita rayuwar kayan takalma sosai kuma zai inganta gasawar samfurin kayan takalma.
SILIKEJerin manyan rukunin NM na Anti-abrasion, Magani masu jure wa lalacewa ga takalman waje
SILIKE Anti-abrasion masterbatch NM jerin, a matsayin reshe na jerin abubuwan ƙari na silicone,Jerin manyan rukunin NM na Anti-abrasionmusamman yana mai da hankali kan faɗaɗa halayensa na juriya ga gogewa banda halayen gabaɗaya na ƙarin silicone kuma yana inganta ƙarfin juriya ga gogewa na mahaɗan tafin takalma sosai. An fi amfani da su ga takalma kamar TPR, EVA, TPU da tafin roba, wannan jerin ƙarin yana mai da hankali kan inganta juriya ga gogewa na takalma, tsawaita tsawon rayuwar sabis na takalma, da inganta jin daɗi da aiki.
• Tafin TPR, Tafin TR
Shawarar kayayyakin:Babban rukunin magungunan hana abrasion NM-1Y,LYSI-10
• Siffofi:
Inganta juriyar gogewa sosai tare da rage ƙimar gogewa
Sanya aikin sarrafawa da bayyanar abubuwa na ƙarshe
Babu wani tasiri akan tauri da launi
Mai dacewa da muhalli
Yana aiki don gwajin gogewa na DIN, ASTM, NBS, AKRON, SATRA, da GB
• Tafin EVA, tafin PVC
Shawarar kayayyakin:Babban rukunin magungunan hana abrasion NM-2T
• Siffofi:
Inganta juriyar gogewa sosai tare da rage ƙimar gogewa
Sanya aikin sarrafawa da bayyanar abubuwa na ƙarshe
Babu wani tasiri akan taurin kai, Inganta ɗan halayen injiniya
Mai dacewa da muhalli
Yana aiki don gwajin gogewa na DIN, ASTM, NBS, AKRON, SATRA, da GB
• Tafin roba (Haɗa NR, NBR, EPDM, CR, BR, SBR, IR, HR, CSM)
Shawarar samfurin:Babban rukunin magungunan hana abrasion NM-3C
• Siffofi:
Inganta juriyar gogewa sosai tare da rage ƙimar gogewa
Babu wani tasiri ga kayan aikin injiniya da yanayin aiki
Sanya aikin sarrafawa, sakin mold da bayyanar abubuwa na ƙarshe
• Tafin TPU na waje
Shawarar samfurin:Babban rukunin magungunan hana abrasion NM-6
• Siffofi:
Rage yawan COF da asarar gogewa sosai ba tare da ƙarawa sosai ba
Babu wani tasiri ga kayan aikin injiniya da yanayin aiki
Sanya aikin sarrafawa, sakin mold da bayyanar abubuwa na ƙarshe
SILIKEJerin manyan rukunin NM na Anti-abrasionAn yi bincike na musamman kuma an ƙera shi don takalmin da ke fitowa daga takalmi, wanda ake amfani da shi sosai a cikin EVA, PVC, TPR, TPU, TR, roba, da sauransu. Yana iya inganta juriyar gogewa ta saman takalmi ba tare da shafar tauri da launin samfuran ba, kuma yana cika wasu ƙa'idodi na gwaji.
Idan kana cikin harkar samar da kayan takalma da cinikayya, za ka iya gwadawaSILIKEJerin manyan rukunin NM na Anti-abrasiondon inganta gasa da ingancin samfuran, kuma a lokaci guda, kuna iya bincika mu A halin yanzu, kuna iya ziyartar gidan yanar gizon mu don ganin ƙarin bayani game da samfur:www.siliketech.com, or you can contact us to get samples for testing: TEl +86-28-83625089, email: amy.wang@silike.cn
Lokacin Saƙo: Yuni-11-2024
