1. Ranar ƙarshe ta PPWR 2026 PFAS: Shirya Fim ɗin Kunshin Abinci tare da Maganin Taimakon Sarrafa Polymer Ba Tare da PFAS ba

Masana'antar marufi tana fuskantar gagarumin sauyi yayin da buƙatun dorewa da tsammanin dokoki ke ci gaba da bunƙasa.

A ƙarƙashin Dokar Sharar Marufi da Rufewa ta Turai (PPWR), buƙatun da suka shafi PFAS don marufi na abinci suna zama muhimmin abin la'akari ga masana'antun da ke samar da kasuwar Turai.

Daga12 ga Agusta 2026, marufin abinci mai dacewa da aka sanya a kasuwar EU zai buƙaci ya cika buƙatun ƙuntatawa na PFAS da aka ayyana a ƙarƙashin Mataki na 5(5) na PPWR.

Dokar ta ƙayyade iyakokin iyaka, gami da:

♦ PFAS ɗin mutum ɗaya: 25 ppb

♦ Jimlar PFAS: 250 ppb

♦ Jimlar sinadarin fluorine: 50 ppm

Ga masu kera fitar da fim, wannan ci gaban yana ƙarfafa kimanta kayan aiki, ƙari, da fasahar sarrafawa da ake amfani da su a duk lokacin aikin samarwa.

2. Matsayin Sarrafa Polymer a Fim ɗin da ke Cike da Sinadarai

Ana amfani da kayan aikin sarrafa polymer (PPAs) a fannin fitar da polyolefin don tallafawa ingancin sarrafawa da ingancin samfura.

A fannin shirya fina-finai, PPAs na iya taimakawa wajen magance ƙalubalen fitar da fim kamar narkakken karyewar da ke narkewa, tarin mutu, daidaiton sarrafa shi, da kuma daidaiton bayyanar saman.

Yayin da masana'antun ke tantance madadin kayan aikin sarrafa fluoride, fasahar PPA mara PFAS tana samun ƙarin kulawa a matsayin hanya ɗaya tilo ta aiwatar da fitar da iska a nan gaba.

Sauyin ba wai kawai yana nufin maye gurbin wani ƙari da wani ba.

Madadin haka, masana'antun suna buƙatar la'akari da: dacewa da resin, yanayin sarrafawa, tsarin fim, da buƙatun samarwa.

3. Zaɓar PPA mara PFAS: Muhimman Abubuwan da Za a Yi La'akari da Su ga Masu Shirya Fina-finai

Tsarin extrusion daban-daban yana buƙatar hanyoyi daban-daban.

Ya kamata a kimanta kayan aikin sarrafa polymer mai dacewa wanda ba shi da PFAS bisa ga tsarin samfurin, fasahar sinadarai, zafin sarrafawa, tsarin resin, da buƙatun fim na ƙarshe.

4. Tsarin Samfurin PPA mara PFAS: Zaɓuɓɓukan Tsarkakakken Ƙari da Babban Batch

Ana samun mafita na PPA mara PFAS na SILIKE SILIMER a cikin nau'ikan samfura daban-daban don biyan buƙatun sarrafawa daban-daban.

4.1Maganin ƙari na PFAS kyauta 100% PPA / fluorine kyauta

Tsarin ƙari mai tsabta yana samar da mafi yawan abubuwan da ke aiki.

Ana iya la'akari da su don aikace-aikacen da ke buƙatar daidaitawar sashi mai sassauƙa, haɓaka tsari na musamman, da kuma cikakken iko akan yawan ƙari.

4.2Maganin Masterbatch kyauta PFAS / ba tare da fluorine ba

Tsarin Masterbatch ya haɗa da kayan aikin taimakon sarrafawa masu aiki a cikin tsarin jigilar polymer. Ma'aikatan PPA marasa SILIMER PFAS sun dogara ne akan fasahar aiki ta copolysiloxane da aka gyara kuma suna samuwa tare da resins daban-daban, kamar PE da PP, don biyan buƙatun sarrafa polymer daban-daban.

An tsara su ne don inganta yadda ake sarrafa su, watsawa da kuma daidaita abinci yayin samarwa.

Zaɓin tsakanin ƙarin PPA mara PFAS 100% da tsarin PPA mara PFAS ya dogara ne akan tsarin samarwa na yanzu na masana'anta, buƙatun tsari, da manufofin sarrafawa.

5. Zaɓuɓɓukan Fasaha: Hanyoyin da ke ɗauke da Silicone da kuma hanyoyin da ba su da Silicone

Ana iya haɓaka fasahar PPA mara PFAS ta amfani da hanyoyi daban-daban na kayan aiki.

Dandalin fasahar ƙara polymer na SILIKE SILIMER wanda ba shi da PFAS ya haɗa da zaɓuɓɓukan da ke ɗauke da silicone da waɗanda ba su da silicone don magance la'akari daban-daban na aikace-aikace.

5.1 Ba a haɗa da Silicone ba tare da PFAS-Free PPA

Kayayyakin jerin SILIMER sune kayan aikin sarrafa polymer marasa PFAS (PPAs) waɗanda Chengdu Silike Technology Co., Ltd suka ƙirƙira kuma suka ƙera.

Su ƙarin kayan aiki ne na polymer waɗanda ba su da fluorine waɗanda aka haɓaka bisa silicone waɗanda aka haɓaka bisa fasahar polysiloxane mai ci gaba. Tsarin kwayoyin halittarsu ya ƙunshi sassan polysiloxane, sassan polar, da sassan da ba na polar ba, wanda ke ba da damar daidaita aikin sarrafawa da dacewa a cikin tsarin polymer daban-daban.

An tsara samfuran SILIMER Series don samar da fa'idodin sarrafawa kamar na PPAs masu fluorinated a aikace-aikace ciki har da fina-finai, kebul, bututu, zare & monofilaments, ciyawar wucin gadi, samar da masterbatch, petrochemicals, da haɗa polymer.

A ƙananan matakan ƙarawa, suna iya taimakawa wajen rage karyewar narkewa, inganta kwararar resin da kuma iya sarrafawa, haɓaka ingancin shafawa, rage tarin mayuka yayin fitar da su, da kuma rage tasirin fatar sharks. Hakanan suna iya taimakawa wajen tsawaita tazara tsakanin tsaftace sukurori, suna ba da gudummawa ga ingantaccen aiki na samarwa, haɓaka ingancin samfura, da kuma ingantaccen sarrafa polymer mai ɗorewa.

5.2 Siloxane-Free PFAS-Free PPA

Ga aikace-aikacen da ƙarin kayan da ke ɗauke da silicone ba su dace ba, taimakon sarrafa polymer na PFAS da silicone SILIMER 9700 da sigar masterbatch ɗinsa SILIMER 9701 suna ba da wata hanyar da za a iya amfani da ita wajen sarrafa fitar da iska.

An ƙera waɗannan fasahohin ne don tallafawa masana'antun da ke magance takamaiman buƙatun kayan aiki, abubuwan da ake so na tsari, da manufofin sarrafawa.

6. La'akari da Zafin Aiki

Zafin fitarwa muhimmin abu ne yayin zabar kayan aikin sarrafa polymer.

Ana haɓaka mafita na PPA mara PFAS na SILIKE SILIMER don yanayin zafin aiki daban-daban.

6.1 Sarrafa Ƙananan Zafin Jiki (<180℃)

An ƙera shi don yanayin fitar da zafi mai ƙarancin zafi, kamar wasu hanyoyin fitar da fim.

Fa'idodin da za a iya samu sun haɗa da tallafi:

• Inganta kwararar narkewa

• Daidaiton sarrafawa

• Daidaiton saman fim

6.2 Tsarin Zafin Jiki Mai Matsakaici (180–200℃)

Ya dace da nau'ikan hanyoyin fitar da fim ɗin da aka saba amfani da su, gami da:

• Fim ɗin PE da aka hura

• Fitar da fim ɗin PP

• aikace-aikacen fim na mPE

An tsara shi don tallafawa daidaitaccen aikin sarrafawa a cikin yanayi daban-daban na samarwa.

6.3 Tsarin Zafin Jiki Mai Tsayi (>200℃)

An haɓaka don hanyoyin fitar da zafi mai zafi, gami da:

• Fim ɗin da aka hura mai zafi sosai

• Aikace-aikacen fina-finan 'yan wasan kwaikwayo

An ƙera shi don tallafawa ingantaccen aiki a ƙarƙashin yanayi mai wahala na fitar da iska.

7.Maganin PPA kyauta na SILIKE SILIMER PFAS don Aikace-aikacen Fim na Fakitin Abinci

Tare da gogewa a fannin sinadarai na silicone da sarrafa polymer, SILIKE ta ƙirƙiro dandalin fasahar PPA mara SILIMER PFAS don tallafawa masana'antun da ke tantance madadin aikace-aikacen fitar da fim.

Don samar da fina-finan marufi na abinci, an tsara mafita na SILIMER don tallafawa:

Fitar da Fim ɗin PE

Ciki har da fim ɗin da aka busa da kuma aikace-aikacen fim ɗin PE mai inganci.

Fitar da Fim ɗin PP

Taimakawa wajen daidaita aiki da kuma aiki mai dorewa na extrusion.

Tsarin Fim Mai Layi Da Yawa

Taimaka wa masana'antun tantance hanyoyin sarrafa hanyoyin sarrafa tsarin fina-finai masu rikitarwa.

8. Shirya don Canjin PPWR PFAS

Sauya zuwa ga marufi mara PFAS ba ya bin hanyar maye gurbin duniya baki ɗaya.

Ga masana'antun shirya fina-finan abinci, zaɓar fasahar sarrafa abinci mai dacewa yana buƙatar kimantawa na:

• La'akari da ƙa'idoji
• Aikin sarrafawa
• Daidaita kayan aiki
• Bukatun samarwa

Mafi kyawun hanyar PPA mara PFAS ya dogara da:

• Tsarin samfur
• Fasahar sinadarai
• Zafin aiki
• Bukatun aikin fim

Daga ƙarin abubuwa masu tsabta zuwa mafita na musamman, daga fasahar da ke ɗauke da silicone zuwa fasahar da ba ta da silicone, da kuma daga ƙananan zafin jiki zuwa hanyoyin fitar da zafi mai yawa, SILIKE SILIMER yana ba da fayil ɗin fasaha mai sassauƙa na PPA mara PFAS don buƙatun fitar da fim ɗin marufi daban-daban.

Yayin da masana'antar marufi ke ci gaba da tantance wasu hanyoyin da za a bi wajen sarrafa fasahar zamani mai amfani da fluoride, zabar kayan aikin sarrafa polymer da suka dace ba tare da PFAS ba zai zama muhimmin abin la'akari don kiyaye ingantaccen aikin fitar da iska yayin da ake magance sabbin tsammanin dokoki.

9. Tambayoyin da ake yawan yi
9.1 Menene ranar ƙarshe ta PPWR PFAS don shirya kayan abinci?

Ka'idojin takaita amfani da PFAS a ƙarƙashin Mataki na 5(5) na PPWR za su shafi marufin abinci da ya dace da aka sanya a kasuwar EU daga ranar 12 ga Agusta 2026.

9.2 Me yasa masana'antun shirya fina-finan abinci ke tantance PPAs marasa PFAS?

Ƙara yawan kulawa ga abubuwan PFAS yana ƙarfafa masana'antun su kimanta wasu fasahohin sarrafa polymer ba tare da abubuwan da aka yi amfani da fluorin ba.

9.3 Shin PPA marasa PFAS za su iya maye gurbin PPAs na gargajiya da aka yi da fluorin?

Aikin PPAs marasa PFAS ya dogara ne akan ƙirar tsari, tsarin resin, yanayin fitarwa, da buƙatun aikace-aikacen. Ana buƙatar zaɓin fasaha mai kyau don kowane tsarin samarwa.

9.4 Ta yaya masana'antun ya kamata su zaɓi PPA mara PFAS?

Zaɓin ya kamata ya yi la'akari da tsarin ƙari, fasahar sinadarai, dacewar polymer, zafin aiki, da buƙatun fim na ƙarshe.

9.5 Shin PPA mara SILIMER PFAS ya dace da fitar da fim ɗin fakitin abinci?

Ana haɓaka hanyoyin samar da mafita na PPA marasa SILIMER PFAS don kimantawa a cikin aikace-aikacen fitar da polyolefin daban-daban, gami da fim ɗin da aka hura PE, fitar da fim ɗin PP, da tsarin fim mai layuka da yawa. Zaɓin ƙarshe ya kamata ya dogara ne akan buƙatun ƙa'idoji, tsarin kayan aiki, da yanayin sarrafawa.

10.Bincika Maganin PPA Kyauta na PFAS don Tsarin Fim ɗinku na Fim

Yayin da ƙa'idodin PFAS ke ci gaba da tasiri ga haɓaka kayan marufi, zaɓar fasahar taimakon sarrafa polymer da ta dace ya zama muhimmin abin la'akari ga masana'antun fina-finai.

SILIKE tana samar da fasahar PPA mara PFAS, gami da mafita masu ɗauke da silicone da marasa silicone, da kuma tsararren tsarin ƙari da masterbatch don aikace-aikacen extrusion polyolefin daban-daban.

Tuntuɓi SILIKE don tattauna buƙatun fitar da fim ɗinka da kuma kimanta mafita mai dacewa ta hanyar sarrafa polymer ba tare da PFAS ba don tsarin samar da ku.

Waya: +86-28-83625089

Wayar Salula / Whatsapp: + 86-15108280799

Email:amy.wang@silike.cn
Yanar Gizo: www.siliketech.com