SILIKESi-TPVabu yana sa agogon kallotaushi da siliki taba,
Si-TPV, taushi da siliki taba, Elastomers masu laushi, tabo juriya,
SILIKE Si-TPV wani haƙƙin mallaka ne mai ƙarfi mai ƙarfi vulcanizated thermoplastic Silicone-based elastomers wanda aka yi ta hanyar fasaha ta musamman mai jituwa, yana taimakawa roba siliki tarwatsa a cikin TPU a ko'ina azaman 2 ~ 3 micron droplets ƙarƙashin microscope. Wannan abu na musamman yana ba da kyakkyawar haɗuwa da kaddarorin da fa'idodi daga thermoplastics da cikakken ƙetaren silicone roba. Ya dace da saman na'urar da za a iya sawa, ƙwanƙwasa waya, na'urorin haɗi na na'urorin lantarki (misali belun kunne, misali), overmolding, fata na wucin gadi, Mota, TPE mai girma, masana'antar TPU….
Sashin shuɗi shine lokacin kwararar TPU, wanda ke ba da kyawawan kaddarorin inji.
The kore part ne silicone roba barbashi samar da silky fata-friendly taba, high da low-zazzabi juriya, weather juriya,tabo juriya, da dai sauransu.
Bangaren baƙar fata wani abu ne na musamman wanda ya dace da shi, wanda ke inganta daidaituwa na TPU da silicone rubber, ya haɗu da kyawawan kaddarorin biyu, kuma yana shawo kan gazawar abu ɗaya.
Gwaji abu | 3100-55A | 3100-65A | 3100-75A | 3100-85A |
Modulus of Elasticity ( Mpa ) | 1.79 | 2.91 | 5.64 | 7.31 |
Tsawaitawa a lokacin hutu (%) | 571 | 757 | 395 | 398 |
Ƙarfin ƙarfi (Mpa) | 4.56 | 10.20 | 9.4 | 11.0 |
Hardness ( Shore A ) | 53 | 63 | 78 | 83 |
Yawan yawa (g/cm3) | 1.19 | 1.17 | 1.18 | 1.18 |
MI (190 ℃, 10KG) | 58 | 47 | 18 | 27 |
Gwaji abu | 3300-65A | 3300-75A | 3300-85A |
Modulus of Elasticity ( Mpa ) | 3.84 | 6.17 | 7.34 |
Tsawaitawa a lokacin hutu (%) | 515 | 334 | 386 |
Ƙarfin ƙarfi (Mpa) | 9.19 | 8.20 | 10.82 |
Hardness ( Shore A ) | 65 | 77 | 81 |
Yawan yawa (g/cm3) | 120 | 1.22 | 1.22 |
MI (190 ℃, 10KG) | 37 | 19 | 29 |
Alama: Bayanan da ke sama ana amfani da su ne kawai azaman fihirisar samfur na yau da kullun, ba azaman fihirisar fasaha ba
1. Samar da farfajiya tare da taɓawa na musamman na siliki da fata, jin daɗin hannu mai laushi tare da kyawawan kayan aikin injiniya.
2. Ba ya ƙunshi mai filastik da mai laushi, babu haɗarin zubar jini / m, babu wari.
3. UV barga da kuma sinadaran juriya tare da kyau kwarai bonding zuwa TPU da irin wannan iyakacin duniya substrates.
4. Rage tallan ƙura, juriyar mai da ƙarancin ƙazanta.
5. Sauƙi don lalatawa, da sauƙin ɗauka
6. Dorewar abrasion juriya & murkushe juriya
7. Kyakkyawan sassauci da juriya na kink
1. Gyaran allura kai tsaye
2. Mix SILIKE Si-TPV® 3100-65A da TPU a wani kaso, sannan extrusion ko allura
3. Ana iya sarrafa tare da tunani zuwa TPU aiki yanayi, bayar da shawarar aiki zafin jiki ne 160 ~ 180 ℃
1. Yanayin tsari na iya bambanta da kayan aiki na mutum da matakai.
2. Ana ba da shawarar bushewar bushewar bushewa don duk bushewa
Fa'idodin wristband wanda Si-TPV 3100-65A yayi:
1. Silky, Friendly-skin touch, dace da yara kuma
2. Kyakkyawan aikin encapsultaion
3. Kyakkyawan aikin rini
4. Kyakkyawan aikin saki da sauƙi don sarrafawa
25KG / jaka, jakar takarda ta fasaha tare da jakar ciki ta PE
Kai sufuri a matsayin sinadari mara haɗari. Ajiye a wuri mai sanyi, da iska mai kyau.
Halayen asali sun kasance cikakke ga watanni 12 daga ranar samarwa, idan an ajiye su a cikin ajiyar ajiya na bada shawarar.Mafi yawan maƙallan agogon hannu a kasuwa an yi su ne daga kayan gel na silica na yau da kullum, wanda ke da sauƙin tsaftacewa da sauƙi don shekaru, da karya, don haka, a can. yawan masu amfani ne da ke neman maƙallan agogon hannu waɗanda ke ba da kwanciyar hankali mai dorewa databo juriya. waɗannan buƙatun don masu kera agogon na musamman da ƙalubale, Masu masana'antun sun fi mai da hankali kan kayan laushi masu dorewa.
Gano Wani Sabon IrinElastomers masu laushi…
$0
Silicone Masterbatch maki
Silicone foda
maki Anti-scratch Masterbatch
maki Anti-abrasion Masterbatch
Babban darajar Si-TPV
Silicone Wax