Labarai

Maganin PA GF30, Abubuwan Haɗakar PP da Aka Gyara, da Kayan Aikin Gida ABS

Injiniyoyi Suna Neman Waɗannan Amsoshin Kowace Rana

"Yadda za a rage fitowar fiber gilashi akan PA6 GF30?"

"Me yasa karfin juyi yake da yawa a cikin abubuwan da aka cika da PP?"

"Yadda za a inganta juriyar karce na gidajen ABS?"

"Akwai wani madadin man silicone wanda ba ya yin fure?"

Ko da tare da resins masu inganci da injunan da aka inganta, masu sarrafawa galibi suna fuskantar:

♦ Juriya mai yawa da amfani da makamashi

♦ Fuskar zare mai gani a kan sassan da aka ƙarfafa

♦ Alamun kwarara, sheƙi mara daidaito, da lahani a saman

♦ Rushewar abubuwa masu wahala da kuma fitar da abubuwa marasa tabbas

♦ Ƙarancin inganci a cikin tsarin cike da manyan kaya

Sakamako: ƙarin ƙimar cirewa · tsawon lokacin zagayowar · koke-koke masu inganci

Ga yawancin tsire-tsire, ainihin matsalar ita ce ƙirƙirar abubuwa, ba kayan aiki ba.

Dakatar da waɗannan matsalolin a Injiniyan Roba da Foda na Silicone — Maganin Ƙarin Polymer ɗinku

Abin da Foda na Silicone ke Yi a Injiniyan Roba

Foda na silicone wani ƙarin filastik ne mai ƙarfi wanda aka yi da foda wanda ya ƙunshi polydimethylsiloxane mai nauyin ƙwayoyin halitta mai yawa (PDMS) wanda aka watsa akan silica. Yana rage gogayya ta ciki, yana inganta sakin mold, kuma yana haɓaka ingancin saman a cikin nau'ikan thermoplastics da robobi na injiniya, gami da PA6 GF30, ABS, PP, PC, PBT, PPO, PPS, da ƙari.

Kamfanin Chengdu SILIKE Technology Co., Ltd. yana bayar da Foda na Silicone na LYSI Series, wanda ke ɗauke da kashi 55–70% na nauyin kwayoyin halitta masu matuƙar girma PDMS wanda aka watsa a kan silica.

Foda na Silicone a matsayin Ƙarin Polymer da Masu Gyara— Inganta Ingancin Sarrafawa da Ingancin Fuskar.

Muhimman Ayyukan Foda na Silicone: Ingantaccen ƙari da sarrafawa wanda aka yi da silicone a masana'antar robobi

1. Yana Rage Gogayya da Ƙarfin Juyawa

Yana rage danko na narkewa da kuma matsin lamba na ciki

Rage amfani da makamashi a cikin ƙera allura da fitarwa

Yana rage ƙarfin juyi a cikin mahaɗan da aka cika da manyan abubuwa ko kuma waɗanda aka ƙarfafa da zare na gilashi

2. Yana Inganta Sakin Mold da Rushewa

Yana samar da wani Layer mai shafawa tsakanin saman narkewa da mold

Rage ƙarfin mannewa, lahani a saman, da kuma rugujewar abubuwa

Yana rage lokacin zagayowar kuma yana rage ƙimar cirewa

3. Yana Inganta Ingancin Fuskar

Rage fitowar fiber gilashi da alamun kwarara

Yana ƙara santsi a saman da kuma daidaiton sheki

Yana inganta juriya ga karce da lalacewa, musamman a cikin abubuwan ABS da PA masu ƙarfi

4. Ya dace sosai da Resins da yawa

Yana aiki a cikin tsarin cike da kuma ƙarfafawa

Yana kiyaye halayen injiniya da kyawun halitta

Shawarar Amfani da Foda Silikon Silikon

• Yawan amfani: 0.1%–2.0% na nauyin resin (a daidaita shi gwargwadon nau'in resin da abun da ke cikinsa)
• Hanya: A haɗa shi da resin kafin a yi masa ƙera
• Shawara: A guji shan maganin busasshe kai tsaye domin hana taruwa da kuma wargajewa ba daidai ba
Amfani da foda na silicone yadda ya kamata zai iya ƙara ingancin samarwa, inganta ingancin sashi, da rage lahani ba tare da canza kayan aikin da ake da su ba.

Foda ta Silicone da ta Silicone Masterbatch: Waɗanne ƙarin robobi ne ya kamata ku zaɓa?

Duk da cewa foda na silicone da silicone masterbatch suna da babban sinadari iri ɗaya (PDMS), aikace-aikacensu da halayen aikinsu sun bambanta sosai.

Idan aka kwatanta da ƙarin silicone ko siloxane na gargajiya masu ƙarancin nauyi - kamar man silicone, ruwan silicone, da sauran kayan aikin sarrafawa - SILIKE Silicone Powder yana ba da ingantaccen aikin sarrafawa kuma yana iya inganta ingancin saman samfuran da aka gama yadda ya kamata.

A matsayin wani ƙarin abu da ake amfani da shi wajen sarrafawa da kuma ƙara silicone, ana amfani da foda na silicone sosai a fannin thermoplastics da kuma injiniyan robobi don haɓaka ingancin samarwa, haɓaka ƙarewar saman, da kuma inganta aikin samfur gaba ɗaya.

Sami Tallafin Ƙwararru da Samfuran Kyauta na Ƙarin Silikon da Siloxane Masu Aiki

Don jagorar fasaha ko gwajiFoda na Silicone na SILIKE LYSI Seriesa cikin aikace-aikacen thermoplastics da robobi na injiniya:

Tuntuɓi injiniyoyinmu don shawarwari na musamman

Nemi samfurin foda na silicone mai aiki mai kyau kyauta

Sami jagora kan shawarar matakin da kuma yawan allurar da aka yi

Tuntuɓi SILIKE:
Lambar waya: +86-28-83625089
Email: amy.wang@silike.cn

Yanar Gizo: www.siliketech.com

Tare da SILIKEƙarin kayan aiki da aka yi da siliconeKayayyakin filastik ɗinka na iya zama masu santsi, masu ɗorewa, kuma masu inganci sosai.