Sin Si-TPV 3520-70A elastomers masu ƙarfi waɗanda aka yi da thermoplastic waɗanda aka yi da silicone

Si-TPV 3520-70A elastomers masu ƙarfi masu ƙarfi waɗanda aka yi da thermoplastic waɗanda aka yi da silicone Hoton da aka Fito

Si-TPV 3520-70A elastomers masu ƙarfi waɗanda aka yi da thermoplastic waɗanda aka yi da silicone

Si-TPV® 3520-70A Thermoplastic Elastomer wani nau'in elastomer ne mai laushi, mai sauƙin shafawa da fata, wanda ke da kyakkyawan haɗin kai ga PC, ABS, TPU da sauran nau'ikan substrates na polar. Samfuri ne da aka ƙera don yin siliki a kan na'urorin lantarki masu sawa, akwatunan kayan haɗi na na'urorin lantarki, da madaurin agogo.

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Sabis na samfurin

Bidiyo

BAYANI

SILIKE Si-TPV® thermoplastic elastomer wani elastomer ne mai ƙarfi wanda aka yi da silicone mai ƙarfi wanda aka yi shi ta hanyar fasaha mai jituwa ta musamman don taimakawa robar silicone da aka watsa a cikin TPU daidai gwargwado azaman barbashi na micron 2 ~ 3 a ƙarƙashin na'urar hangen nesa. Waɗannan kayan na musamman sun haɗa ƙarfi, tauri da juriyar gogewa na kowane elastomer mai yanayin zafi tare da kyawawan halaye na silicone: laushi, jin siliki, hasken UV da juriyar sinadarai waɗanda za a iya sake amfani da su kuma a sake amfani da su a cikin hanyoyin masana'antu na gargajiya.

Si-TPV® 3520-70A thermoplastic elastomer abu ne mai kyau da kuma laushin siliki wanda zai iya haɗawa da PC, ABS, TPU da sauran abubuwa masu kama da polar substrates. Samfuri ne da aka ƙera don yin siliki a kan na'urorin lantarki masu sawa, akwatunan kayan haɗi na na'urorin lantarki, da kuma madaurin agogo.

AIKACE-AIKACE

Mafita don taɓawa mai laushi akan ƙira akan wayoyin komai da ruwanka, akwatunan lantarki masu ɗaukuwa, madauri na hannu na agogon smart, madauri, da sauran na'urorin lantarki masu sauƙin ɗauka.

DUKIYOYIN AL'ADA

Gwaji*	Kadara	Naúrar	Sakamako
ISO 868	Tauri (daƙiƙa 15)	Bakin Teku A	71
ISO 1183	Takamaiman Nauyi	--	1.11
ISO 1133	Ma'aunin Gudun Narkewa 10 kg & 190°C	g/minti 10	48
ISO 37	Modulus na elasticity (MOE)	MPa	6.4
ISO 37	Ƙarfin Taurin Kai	MPa	18
ISO 37	Damuwa Mai Tsanani @ 100% Tsawaita	MPa	2.9
ISO 37	Ƙarawa a lokacin hutu	%	821
ISO 34	Ƙarfin Yagewa	kN/m	55
ISO 815	Saitin Matsawa awanni 22 a 23°C	%	29

*ISO: Ƙungiyar Daidaita Daidaito ta Duniya ASTM: Ƙungiyar Gwaje-gwaje da Kayan Aiki ta Amurka

SIFFOFI & AMFANIN

(1) Jin laushi mai laushi

(2) Kyakkyawan juriya ga karce

(3) Kyakkyawan haɗin kai zuwa PC, ABS

(4) Mai tsananin son ruwa

(5) Juriyar tabo

(6) Bargaren UV

YADDA AKE AMFANI DA SHI

• Jagorar Sarrafa Molding na Allura

Lokacin Busarwa	Awa 2–6
Zafin Busarwa	80–100°C
Zafin Yankin Ciyarwa	150–180°C
Zafin Jiki na Tsakiyar Yankin	170–190°C
Zafin Jiki na Gaba	180–200°C
Zafin Bututun	180–200°C
Zafin Narkewa	200°C
Zafin Mold	20–40°C
Gudun Allura	Matsakaicin matsakaici

Waɗannan yanayin tsari na iya bambanta da kayan aiki da hanyoyin aiki daban-daban.

• sakandareSarrafawa

A matsayin kayan thermoplastic, ana iya sarrafa kayan Si-TPV® na biyu don samfuran yau da kullun

•AlluraGyaraMatsi

Matsin riƙewa ya dogara ne da yanayin, kauri da wurin ƙofar samfurin. Ya kamata a saita matsin riƙewa zuwa ƙaramin ƙima da farko, sannan a hankali a ƙara har sai babu wata matsala da ta shafi hakan a cikin samfurin da aka yi wa allura. Saboda halayen roba na kayan, matsin riƙewa mai yawa na iya haifar da mummunan lalacewar ɓangaren ƙofar samfurin.

• Matsi na baya

Ana ba da shawarar cewa matsin lamba na baya lokacin da aka ja da baya ya kamata ya zama 0.7-1.4Mpa, wanda ba wai kawai zai tabbatar da daidaiton narkewar narkewa ba, har ma zai tabbatar da cewa kayan ba su lalace sosai ta hanyar yankewa. Saurin sukurori da aka ba da shawarar Si-TPV® shine 100-150rpm don tabbatar da cikakken narkewa da plasticization na kayan ba tare da lalata kayan da dumamawar yanke ta haifar ba.

HANYOYIN GUDANAR DA SHI

Ana ba da shawarar na'urar busar da danshi mai bushewa don busarwa.

Ba a haɗa bayanan lafiyar samfura da ake buƙata don amfani mai aminci a cikin wannan takardar ba. Kafin a sarrafa, a karanta takaddun bayanai na samfura da aminci da kuma lakabin kwantena don amfani mai aminci, bayanai game da haɗarin jiki da lafiya. Ana samun takardar bayanai game da aminci a gidan yanar gizon kamfanin silike a siliketech.com, ko daga mai rarrabawa, ko ta hanyar kiran sabis na abokin ciniki na Silike.

RAYUWAR DA AJIYEWA MAI AMFANI

A kai shi a matsayin sinadari mara haɗari. A adana a wuri mai sanyi da iska mai kyau. Halayen asali za su kasance ba tare da wata matsala ba na tsawon watanni 24 daga ranar da aka samar, idan an ajiye shi a cikin wurin da aka ba da shawarar a adana.

BAYANIN MARUFIN

25KG / jaka, jakar takarda mai sana'a tare da jakar ciki ta PE.

IYAKA

Ba a gwada wannan samfurin ba kuma ba a wakilta shi a matsayin wanda ya dace da amfani da shi na likita ko magunguna ba.

BAYANIN GARANTI MAI IYAKA - DON ALLAH A KARANTA A HANKALI

An bayar da bayanin da ke cikin wannan bayanin da gaskiya kuma ana kyautata zaton daidai ne. Duk da haka, saboda yanayi da hanyoyin amfani da kayayyakinmu sun fi ƙarfinmu, bai kamata a yi amfani da wannan bayanin a madadin gwaje-gwajen abokin ciniki don tabbatar da cewa kayayyakinmu suna da aminci, inganci, kuma cikakke ga amfanin da aka yi niyya. Ba za a ɗauki shawarwarin amfani a matsayin abin da zai sa a keta haƙƙin mallaka ba.

Na baya: Silicone masterbatch lysi-506 tare da PP a matsayin resin mai ɗaukar kaya

Na gaba: Si-TPV 3420-90A siliki mai taɓawa mai ƙarfi wanda aka yi da thermoplastic mai tushen silicone

Juriyar karce